Journey 2 Nebula - Jawbreaker: Cutting & Layout

The next stop on the Journey 2 Nebular is Jawbreaker. In this pattern, we practice cutting strip sets and turning triangles into hexagons. I've pieced Jaybird Quilts Science Fair before, so I'm pretty familiar with the technique.

For this project, I decided to use some leftover strips from my Jelly Snowflake Quilt, The Christmas Card by Sweetwater for Moda. (Yay! Using up stash!) I'm sure I must have mentioned it before, but I have realized that jelly rolls are not my favorite pre-cut. No matter what, they seem to end up wobbly, plus the ones I've been using are slightly over 2.5," which isn't necessarily bad, but for this pattern, the size is essential.

I felt a little lazy, so I didn't want to deal with starching the pieces for this one, so I went with Best Press. It performs similarly to the starch that I use, but I don't have to wait for it to dry. I use the unscented because I'm quite particular about scent, and it works well. I laid my strips out as straight as I could get them, sprayed, and pressed. There's a little shrinkage, and it stiffens the fabric up a bit.

After that, I pieced the strips so I could get to cutting. I did have a bit of a mishap while cutting this one, and unfortunately, the accident wasn't the fabric. It was my finger. Don't worry; it's not a major injury. I try to be very careful when using the rotary cutter since I tend to be accident-prone. Before I cut, I make sure my hands are out of the way, everything is stable, and I have created the habit of closing my blade every time I'm done with a cut, even if I'm just shifting the ruler. I've seen too many Facebook posts in my quilting groups of slices, and I'm not good with blood! Anyway, I have a feeling it was coming. When I thought, "you know, I think it's going to happen today...I'm going to get cut," I should've just put the rotary cutter down and walked away. Not me! As I moved to close my blade with my right hand, my left hand decided to have a mind of its own and moved just close enough to the blade that it cut my index finger between my second and third knuckles. It was an instant, and all I could think was, "Oh no!" I immediately applied pressure after seeing how much it would bleed (not the best plan for someone who doesn't like blood) and went to grab a paper towel. I laid down and applied pressure for a bit. After a while, I checked it, and the pressure worked, and it seemed to stick itself back together. After that, I cleaned it up, applied my trusty antibiotic ointment and a bandage, and moved on with my day. It stung for a bit, about the same as a nasty cat scratch, but it's not too bad now.

Despite all of that drama, I managed to get my triangles cut. It's a pretty easy cut. After repositioning the ruler each time, you just have to make one cut.

I'm not sure which fabrics I'm going to go with for assembly, but I think I like this layout. I know the black stands out, but I really love the Christmas tree print, so I don't hate that it's a feature fabric. I have a week to decide!

Jelly Snowflake Mystery Quilt Finishing

I finished assembling the top of the Jelly Snowflake Mystery Quilt on July 31, so I finished the assembly before July was over, and I’m super excited about it. It’s not often I manage to keep myself caught up, especially this time of year, when I’m spending time outside on the boat. I thought about making it a little bigger, but in the end, I’m good with the pattern size.

Finishing involved a center block and border pieces. The top came together fairly quickly, especially when I was able to match seams. It’s not my first time matching/nesting seams, but every time I do it, I get just a little bit of a thrill. I always anxiously peek at the intersection points and often make the slightest squeal of delight when everything matches up the way it’s supposed to. Sometimes I wonder if I’m going to stop doing that, but to be honest, I hope I don’t.

The next step is, of course, the quilting. As I’ve mentioned, I don’t have a very large throat space on my machine, so I often find free motion quilting, or really any quilting, to be troublesome. I also always want to be better than I am, and I know that’s more a function of not practicing than my actual ability. I understand that a new machine wouldn’t solve all of my problems, but I do imagine it would be helpful to be able to shove more quilt through the machine. I have an idea of what I want to do for the quilting. I’ve drawn it out on paper, we’ll see if I can actually accomplish it.

Jelly Snowflake Mystery Quilt Block 4

I managed to get myself caught up on the blocks for the Jelly Snowflake Mystery Quilt Sew Along! Block 4 was a relatively easy block, though it is a long rectangle, which I worry about a little because sometimes they have a tendency to get a little wobbly.

It was a pretty easy block to put together. Once I had the pieces cut (which also didn’t take long with the Stripology XL ruler), I was able to assemble each block in about half an hour. That includes pressing and trimming. Considering I’m not the speediest sewer, I’m pretty pleased with that time.

I’m excited to put together the final layout. I couldn’t wait, so I laid it out and I’m letting the layout sit for a day or so. I generally like to do that will all of the quilts I make. I like to make sure that I’m don’t have two of the same fabrics next to each other, or two of the same color. I’ll usually lay it out, take a picture (or two) with my phone and stare at it, squint my eyes, and scroll back and forth from the image so I can get an overall picture.

Jelly Snowflake Mystery Quilt Block 2

What a shock, I’m behind! Block 2 of the Jelly Snowflake Mystery Quilt was a tough one for me. I’m not good at flying geese. It doesn’t matter what I do, how I cut, how I draw a line, how I sew, I inevitably end up with blocks that are off somehow.

I’ve been using my cheap-and-not-at-all-a-design-board piece of cardboard and that has helped me organize my blocks, along with the Alphabitties. I know I could easily MAKE a design board. Lori Holt just posted a video on it this weekend, but at the moment it’s spend time making a design board or sewing, and sewing has currently won. (If you haven’t checked out the video yet, I recommend it. The organization Lori has for her blocks is enviable!)

Someday, hopefully soon I’ll work on making my own design boards. I could also purchase them, but since I have the ability to make them, why wouldn’t I go the more affordable route? I DO need a glue gun anyway, so this is a good excuse, right? :)

Anyway, back to those flying geese. I don’t know why I have such a hard time with them. I’d like to blame my machine, but I’m pretty sure it’s more me trying to go too quickly and get things done and making a mess of things. I know that people are going to look at them and say “those look great, what are you talking about?” but if they’re not perfect, they’re wrong. (That’s a me thing though, I wouldn’t say that to anyone else!)

I did avoid trying to catch up on this block because of my fear of flying geese. And because I was going so slow, this block did take me a lot longer than I wanted it to, but they are done and I’m pretty pleased with them. I’m not sure I’ll be happy with using the lighter color on them, but using the lighter color also has the advantage of the mistakes blending in just a little bit better!

Jelly Snowflake Mystery Quilt

With everything going on in the world and spending a lot of time at home, I’m longing for joyous times. Christmas has always been a favorite holiday of mine, so when Fat Quarter Shop announced their Jelly Snowflake Mystery Quilt, how could I not participate?

I chose The Christmas Card by Sweetwater for the jelly roll, backing, and binding. It’s been hard to pick which 14 strips to use in the quilt, but I narrowed it down and starched. Now, I just have to decide which fabrics to use for part one.